Ne yapmak biz ihtiyaç ödemek dikkat içinde süreç pelet makine granülasyon?

            Raw materials in the production of particles before, is to be tempered, then the pressure requirements of the steam must be stable (4 ~ 8bar), and tempering steam before tempering must be de-watered, because the steam contains a large amount of water, which will cause the clogging of the granulation. After tempering, the material is subjected to a certain degree of maturation, which can significantly improve the utilization rate of nutrients in the feed.

            In the process of granulation, the humidity and temperature of the material should be checked frequently. Moisture check method is: hand pinch, the material can be good as a block. Temperature should be different according to the different varieties of granulation, to be stably controlled between 75 ~ 95 degree . The cooling of granulation particles must not be too fast or not enough cooling, if the cooling is too fast, it will make the surface of the material particles cracking, cooling is not enough, the temperature is too high, it will make the material hygroscopic, resulting in moldy lumps. The cooled material should be consistent with the room temperature.